"HammerheadFistpunch" (hammerheadfistpunch)
03/09/2017 at 13:46 • Filed to: None
2
6|
"HammerheadFistpunch" (hammerheadfistpunch)
03/09/2017 at 13:46 • Filed to: None | 2
| 6 |
Quick question for redoing the seats on my cruiser...is seat frame rebuilding a thing? (as in to tighten slop and repair controls) and who would do that?
Seat frames are spensive, hoping to avoid getting new ones. even used ones.
Steve is equipped with Electronic Fool Injection
> HammerheadFistpunch
03/09/2017 at 14:17 |
|
I showed the shop manager and it seems like you could either have someone fabricate the part or get a new frame (for $350 from Cruiserparts)
Some new fasteners could tighten some stuff up, too.
I don’t know who could fabricate it.
vicali
> HammerheadFistpunch
03/09/2017 at 14:19 |
|
I’ll see you, and raise you one more fotc;
|
HammerheadFistpunch
> Steve is equipped with Electronic Fool Injection
03/09/2017 at 14:20 |
|
I should say this seat ain’t mine. Used for illustration. Mine is not busted, just sloppy
|
Steve is equipped with Electronic Fool Injection
> HammerheadFistpunch
03/09/2017 at 14:23 |
|
A decent auto electric or trim shop should be able to do the basic “strip, clean, and tighten everything down” stuff. Beyond that I’m not sure.
|
Steve is equipped with Electronic Fool Injection
> HammerheadFistpunch
03/09/2017 at 14:23 |
|
A decent auto electric or trim shop should be able to do the basic “strip, clean, and tighten everything down” stuff. Beyond that I’m not sure.
VCeXpedition
> Steve is equipped with Electronic Fool Injection
03/09/2017 at 20:40 |
|
It looks like in the picture that nothing is missing, just broken and out of place, if it’s not crappy metal, it could easily be welded and reinforced. I wouldn’t hesitate to put that back together.
Crazy expensive for used parts, there must be a market!